EBR K-200 can be used comfortably in all clinics where GETAT applications are performed. With its Dipole (Bipolar) antenna, it transmits RF to the targeted area, supporting resonance effects in tissues as described in its intended therapeutic use.

The device is packaged in a ready-to-operate condition. It is carefully removed from its packaging and placed in the area where it will be used, at a distance that allows the frequency cable to reach the patient bed. Then, the power cable is plugged into an electrical outlet. When the external Start/Stop button is pressed, the device begins to operate.

In accordance with the treatment protocol determined by the physician, the RF Electrode head is applied by holding it steadily on the skin above the targeted tissues, tumors, or affected areas at specific intervals. Before the session begins, the patient drinks 250 ml of water. Approximately 10 minutes later, the session is started.

According to the cancer stage defined in the treatment protocol, the RF power is adjusted between levels 1 and 5. As the stage progresses, the RF power may be increased proportionally. During session applications, the patient should not have any metal or electronic items on them. The device session duration is pre-set to 30 minutes. When this duration ends, the frequency automatically shuts off. This resets the device menu for the next patient session.

Features of the EBR K-200 Device:

• One Hyperthermia system
• Therapy program prepared for 980 different conditions
• One ETNA Quantum Analyzer device
• Remote access and device monitoring system